
The firewall section is one of the shortest parts of the Cyber Essentials question set, and one of the most often queried. Most organisations have a firewall of some kind. Where answers fall down is in the detail: devices that leave the office, admin pages left open to the internet, and inbound rules nobody remembers approving.
This guide sets out what a compliant setup needs to do under the NCSC's Cyber Essentials Requirements for IT Infrastructure v3.3 and the Danzell question set (section A4). It explains the requirements; how you meet them, and which products you use, is your organisation's choice.
Every in-scope device needs firewall protection
The requirement is that every device in scope is protected by a correctly configured firewall, or by a network device with firewall functionality. In practice that means two layers:
- A boundary firewall for your office network. For most small organisations this is the firewall built into the internet router.
- A software firewall on laptops and desktops, switched on and configured.
The question set asks about both: boundary firewalls (A4.1) and software firewalls on computers and servers (A4.1.1). If software firewalls aren't switched on by default, you'll be asked why (A4.1.2).
Home working and public Wi-Fi
This is where many submissions are queried. When a device connects to a network your organisation doesn't control, such as a home broadband router, a hotel or a coffee shop, the office firewall isn't protecting it. The requirements say a software firewall needs to be configured on any device used on untrusted networks.
A home router can't usually be counted as your boundary firewall, because you don't manage it. The software firewall on the device is what protects it there. The NCSC also says to prefer the firewall that comes with the operating system over a third-party one.
Default and admin passwords
Every router and firewall comes with an admin account. The requirements say the default admin password needs to be changed to a strong, unique one, or remote administration switched off altogether. The question set asks:
- whether default passwords on routers and firewalls have been changed (A4.2), and how you change them (A4.2.1);
- how the firewall password is set up (A4.3): MFA, a password of at least 12 characters, or at least 8 characters with common passwords blocked automatically;
- what you do if the password is compromised (A4.4).
Admin access from the internet
Some routers and firewalls let you reach their settings page from anywhere on the internet. The requirement is clear: the admin interface shouldn't be reachable from the internet unless there's a clear, documented business need. If it is, it needs to be protected by MFA, or by an IP allow list combined with a properly managed password.
The question set asks whether the configuration is accessible over the internet (A4.9), the business need (A4.10) and how it's protected (A4.11). "Remote management is on because the installer set it up" isn't a business need. If nobody uses it, switching it off is usually the simplest compliant answer.
Inbound rules
By default, a firewall needs to block unauthenticated inbound connections. Where you do allow something in, for example remote access to a server or a camera system, each rule needs:
- a business need;
- approval from an authorised person, written down;
- removing or disabling when it's no longer needed.
The question set asks whether unauthenticated inbound connections are allowed (A4.7), how allowed connections are approved and documented (A4.8), and whether the rules have been reviewed in the last 12 months (A4.6).
Describe how, not just that
The firewall section also asks how you manage the firewall (A4.5). Answers such as "managed by our IT provider" or "we review it regularly" state that something happens without describing how. A good answer says who does it, how often and what they check. Our article on describing how a control is done explains what assessors look for, and how to write and summarise a compliant process shows how to set one out.
Quick check
- Is there a firewall between your office network and the internet?
- Is the software firewall switched on for every laptop and desktop, especially those used at home or on public Wi-Fi?
- Have the default admin passwords on routers and firewalls been changed?
- Is the admin page blocked from the internet, or protected by MFA or an IP allow list with a documented business need?
- Are inbound connections blocked unless approved, documented and still needed?
If any answer is "no" or "not sure", our free readiness check shows what to look at next, and the free members' firewall settings checklist takes you through each point.
Guidance only
This article is general guidance on the published requirements. It isn't an assessment of your setup and doesn't mean you will pass. The requirements and IASME's marking guidance change, so always check against the current question set. Only the assessor who marks your submission decides whether it passes.
If you'd rather have an assessor check every answer with you before you submit, our Supported Certification does exactly that.
This article refers to the NCSC’s Requirements for IT Infrastructure v3.3. Find it on our members’ page, next to the Danzell question set, with links to the matching Resource Hub articles.
Firewall settings checklist: Check your routers, firewalls and device firewalls, including home workers.
Scope builder: List your devices, cloud services and networks and get a scope summary ready for your assessment.
Prefer an assessor to take you through it? See Supported Certification.
Is anything in this article incorrect or out of date?
Microsoft, Google and other vendors change their screens regularly. If you’ve spotted an error or if something no longer matches what you see, tell us here. Every report is reviewed, and we credit contributors (with your permission).


